DeWalt DWE7485 Original Instructions Manual page 13

Package Contents
The package contains:
1 Partly assembled machine
1 Rip fence assembly
1 Mitre fence
1 Saw blade
1 Upper blade guard assembly
1 Throat plate
2 Blade wrenches
1 Dust extraction adapter
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Wear face mask.
Keep hands away from cutting area and the blade.
Carrying point.
Date Code Position (Fig. A)
The date code 25 , which also includes the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A, C)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Table
1
Blade
2
Rip scale indicator
3
Fine adjust knob
4
Rail lock lever
5
Blade height adjustment
6
wheel
Bevel lock lever
7
ON/OFF assembly
8
Mounting holes
9
Mitre gauge
10
Blade guard assembly
11
Carry handle
12
Dust collection port
13
Guard dust collection port
14
Throat plate
15
Rip fence
16
Rip fence latch
17
Narrow ripping fence/
18
support extension
Blade wrenches (stored
19
position)
Push stick (stored position)
20
Intended Use
Your table saw has been designed for professional ripping,
cross-cutting, mitreing and bevelling with various materials as
wood analogous materials and plastic.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This table saw is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Unpacking
• Remove the saw from the packaging material carefully.
• The machine is fully assembled except for the rip fence,
mitre gauge, dust adapter and blade guard assembly.
• Finalise the assembly following the instructions as
described below.
Mounting the Saw Blade (Fig. A, B)

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: To reduce the risk of injury, wear gloves when
handling the saw blade.

WARNING: The teeth of a new blade are very sharp and
can be dangerous.

WARNING: The saw blade MUST be replaced as described
in this section. ONLY use saw blades as specified under
Technical Data. We suggest DT99565. NEVER fit other
saw blades.
nOTE: This tool has blade installed from factory.
English
Riving knife (non-through
21
sawing) (Fig. C)
Mitre gauge storage
22
Cable holder
23
DE7400 brackets mounting
24
holes
11