Hardware Configuration; Hardware Versions; Software - Clavia nord lead 2X Service Manual

Hardware configuration

The N2X model (Lead, Rack) is decided by pos C17 and C19 on the panel board, rack
version has 0 ohm resistors on this position while the Lead version has
100nF capacitors mounted. The Lead panel board
and modulation wheel
(10190)

Hardware versions

Main board
ver. 0.4

Software

Uploading OS and sounds
The software version is briefly shown on the LED display when you power up the Nord
Lead 2X. To update the software, the BootPROM U9 needs to be changed.
For ordering information, contact Clavia at
service@clavia.se.
Returning to factory settings
In order to return to factory settings, press <shift + mod env> after the Nord Lead 2/2X
has powered up. The original programs are restored as they were programmed when
the unit left the factory.
All factory presets are available for download at
Clavia DMI
which the rack version does not have.
(23040)
BootPROM
V1.0
Service manual Nord Lead 2x rev. 1.1
features both pitch stick
(69177)
Notes
www.clavia.se
Page 8