HITEC RDX 2 PRO Manual page 27

Battery Memory Set and Call Out
A
A
A
G
*FLASHING
A
A
A
A
A
A
A
[BATT MEMORY 1]
ENTER SET ->
BATT TYPE
Pb
BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE BATT VOLTAGE
12.0V (6P) 12.0V (6P) 12.0V (6P)
CHARGE CURRENT CHARGE CURRENT CHARGE CURRENT CHARGE CURRENT CHARGE CURRENT CHARGE CURRENT CHARGE CURRENT CHARGE CURRENT
2.0A 2.0A 2.0A 2.0A
DISCHG CURRENT DISCHG CURRENT DISCHG CURRENT DISCHG CURRENT DISCHG CURRENT
2.0A
DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE DISCHG VOLTAGE
1.8V/CELL 1.8V/CELL 1.8V/CELL 1.8V/CELL
SAVE PROGRAM
ENTER
SAVE PROGRAM
SAVE...
[BATT MEMORY 1]
Pb 12.0V (6P)
[BATT MEMORY 1]
C:2.0A D:1.0A
PB:
Press the MODE/STOP button to exit any charging
programs you are currently in and then SCROLL to the BATT
MEMORY program.
Press the Jog Dial ENTER to enter the program. SCROLL to
select the memory #. Once set, the battery type and voltage
will be displayed. If not set, it will read ENTER SET.
Press the Jog Dial ENTER to set up a new memory. BATT TYPE
will be displayed, press ENTER to make it blink and then
SCROLL to select PB. Once selected, press ENTER to store.
SCROLL to the right for BATT VOLTAGE, press ENTER to make
it blink and SCROLL to adjust. Once selected, press ENTER to
store.
SCROLL to the right for CHARGE CURRENT, press ENTER to make
it blink and SCROLL to adjust.Once selected, press ENTER to
store.
SCROLL to the right for DISCHG CURRENT, press ENTER to make
it blink and SCROLL to adjust. Once selected, press ENTER to
store.
SCROLL to the right for DISCHG VOLTAGE, press ENTER to make
it blink and SCROLL to adjust. Once selected, press ENTER to
store.
Finally, SCROLL to the right for SAVE PROGRAM, press ENTER to
store this memory.
27