Weak Gsm Signal Alarm - SimPal -T420 User Manual

"Slave4": ON 25C D
Socket under "delay control" it will show character "D" after the temperature value, when socket
under "Temperature control", it will show character "T" after the temperature value, when
socket under "Schedule control", it will show "C" after the temperature value.
Check Master socket "delayed control" parameters: ​ # 34#​
Check Slave socket "delayed control" parameters: ​ # 63#name#​
Check Master socket "Schedule control" parameters: ​ # 33#​
Check Slave socket "Schedule control" parameters: ​ # 64#name#​
Check Master socket "Temperature control" parameters:
Check Slave socket "Temperature control" parameters:
Check Master socket "Temperature alarm" parameters: ​ # 35#0#​
Check Slave socket "Temperature alarm" parameters: ​ # 68#name#​

3.16 Weak GSM signal alarm

The socket can send a SMS notification when the GSM signal strength is too weak. The Master
user can enable/disable this SMS notification.
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
​ # 32#​
​ # 66#name#​
32
​ ( 66)
​ ( 67)
​ ( 68)
​ ( 69)
​ ( 70)
​ ( 71)
​ ( 72)
​ ( 73)