Electrical Wiring - Hitachi airCloud HC-IOTGW Installation & Maintenance Manual

(b) Install the airCloud Gateway on the guide rail by the clip.
Clip
Pull down the middle clip of the lower body
and embed the guide rail at the same time

3.2 Electrical Wiring

Read and understand "1. Safety Summary" in this manual well before performing wiring work.
Wiring work for power line, communication with air conditioners (H-LINK) and Ethernet cable
(LAN) with cloud are required.
Note that wiring work for communication with external devices is also required for any external
device connected to the system. Ensure that the power line is turned off before performing any
wiring work.
Wall
Guide rail
Figure 3.7 Install on the DIN Rail
13
Wall
Guide rail
Clip
Push up the clip