Subscribe to Our Youtube Channel
Related Manuals for GAPOSA QCXSUN
Summary of Contents for GAPOSA QCXSUN
- Page 1 QCXSUN Funk-Sonnensensor, 1-Kanal mit Saugnapfbefestigung an der Sheibe GAPOSA srl via Ete, 90 - 63900 Fermo - Italy T. +39.0734.22071 - F. +39.0734.226389 info@gaposa.com - www.gaposa.com QCXSUN_ML_1014...
- Page 2 QCXSUN was developped for all GAPOSA radio motors installed in interior/exterior blinds or roller shutters. NOTE: Before starting the programming procedure it is necessary to check which interior blind, exterior blinds or roller shutters will be controlled by the sun sensor.
- Page 3 QCXSUN 2. PROGRAMMING QCXSUN IMPORTANT: QCXSUN sensor can only be programmed once the radio motor has already been programmed to a transmitter. 1 Press and hold PROG-TX button of the MASTER transmitter till the motor starts moving 2 Check the motor rotation then release Prog-TX...
- Page 4 4. ADDITIONAL FUNCTIONS (AS A NORMAL TRANSMITTER) Buttons 1+2= opening command to programmed blinds/shutter; Buttons 2+3 = closing command to programmed blinds/shutters. OPEN CLOSE 5. REPLACING THE BATTERY 1. Remove the rubber band, the screw and the back cover; IMPORTANT: While replacing the battery, it is extremely important to be very careful and to not damage the sun sensor.
Need help?
Do you have a question about the QCXSUN and is the answer not in the manual?
Questions and answers