Problem Check Point - Samsung WW10T754DBH Service Manual

4-2. PROBLEM CHECK POINT

PROBLEM
The washing machine won't start.
Water supply is insufficient, or no water
is supplied.
The washing machine vibrates badly, or
makes noise.
The washing machine does not drain
and/or spin.
The door won't open.
Button Check
Can I open the Add Door
at any time?
34 _ Troubleshooting
• Make sure the washing machine is plugged in.
• Make sure the door is properly closed.
• Make sure the water tap is open.
• Tap Start or Press Start/Pause button again.
• Open the water tap fully.
• Make sure the water supply hose is not frozen.
• Make sure the water supply hose is not kinked or clogged.
• Clean the filter on the water supply hose.
• Make sure the washing machine is installed on a level floor. If the floor is not
level, use the leveling feet to adjust the level.
• Make sure that the shipping bolts are removed.
• Make sure the washing machine is not touching any other object.
• Make sure the laundry load is balanced.
• Make sure the drain hose is straightened all the way to the drain system.
• Make sure the debris filter is not clogged.
• Press the Start/Pause button to stop the washing machine.
• The door stays locked as long as the washing machine is still hot inside
after a heating operation.
• It may take several seconds to disengage the door lock mechanism.
• bC occurs. Refer the bC troubleshooting.
• T he Add Door can be opened only when the indicator appears.
However, it does not open in the following cases:
- W hen the water temperature is above 55deg or the drying process is running,
when the drum is rotating, at any point on the ECO drum clean cycle.
- If you set the Child Lock for safety reasons.
- W hen the drum wash or drum drying cycle is running that does not involve
additional laundry.
SOLUTION