Emerson CF930LBS00 Owner's Manual page 18

6.3
NOTE: If installing Ceiling Fan without the LED
Light Fixture Assembly, An Accessory No-Light
Cover may be purchased separately.
Securely connect the LED Light Fixture Assembly
White Wire Terminal to the Fan Motor Assembly White
Wire Terminal (Figure 30).
Securely connect the LED Light Fixture Assembly Black
Wire Terminal to the Fan Motor Assembly Blue Wire
Terminal (Figure 30).
6.4
Remove One of the Three #8-32 x 10 mm Serrated
Pan Head Screws in the Lower Housing and loosen
the remaining Two #8-32 x 10 mm Serrated Pan Head
Screws (Figure 31).
Retain the #8-32 x 10 mm Serrated Pan Head Screw
for future use.
Tuck wires into the LED Light Fixture Assembly and
position in the Lower Housing Assembly.
NOTE: Make sure wires and terminals are
positioned under the LED Light Fixture Assembly
and not pinched between LED Light Fixture
Assembly and Lower Housing.
Figure 30
REMOVE ONE
#8-32 x 10 mm
SERRATED PAN
HEAD SCREW
LED LIGHT
FIXTURE
ASSEMBLY
Figure 31
18
LOOSEN TWO
#8-32 x 10 mm
SERRATED PAN
HEAD SCREWS
U.L. Model No.: CF930L