Operation - Honeywell HFD-110 Important Safety Instructions Manual

HFD-110_OM.qxd 5/29/08

OPERATION

• Press the power (
• The LCD screen will display Medium (
• To change speeds, press the up (
(Fig. 2). The display will indicate the current setting:
Low ( ), Medium (
• For best results, set the unit to operate at High (
quieter settings, or during sleep, set the unit to Medium (
( ).
• To turn the unit off, touch the Power (
Timer Operation
Once the air purifier is turned on, you can program this unit to turn off
automatically after a set amount of time.
• Press the Timer button – the LCD screen flashes the number "8"
(Fig. 3).
• Press the timer plus (
hours (1 to 18). The selected number will flash for a few seconds – once it stops flashing, the air purifier is
in Timer mode.
(Example: If you want the unit to turn off in 6 hours, touch the Timer
button, then press the timer minus (
"6" is displayed.)
• To turn the Timer mode off, press the Timer button twice.
NOTE: Removing the IFD
cancel the Timer function.
DUAL UV LAMP OPERATION
• Press the UV button to turn the Lamps on or off (Fig. 4).
• The Lamps will light and you will see a faint blue glow along the
front of the unit above the grille.
• The UV button will be illuminated on the control panel.
NOTE: Removing the IFD
cancel the UV Lamp function.
9:42 AM Page 3
) button to turn the air purifier on (Fig. 1).
).
) or down (
), High ( ).
) button.
) or timer minus ( ) buttons to increase or decrease the desired number of
) button until the number
™ filter assembly or turning the unit off will
™
filter assembly or turning the unit off will
Fig. 1
) buttons
) speed. For
) or Low
Fig. 2
Fig. 3
Fig. 4
3