Advertisement
11. Camcorder: Touch [
Step 3: Connecting the camcorder to an access point
12. If necessary, set up a connection to an access point.
If you have previously configured and saved only one connection to an access point, the
•
camcorder will automatically connect to that access point.
If you have saved more than one connection to an access point, touch [
•
access point displayed on the screen, and then continue. To use a different access point instead,
touch [Change Connection Point] > desired access point > [
If no connections to access points have been saved in the camcorder, the message [Save the
•
access point] will appear on the screen. Touch [
point connection.
].
] to use the
], and then continue.
] to configure and save a new access
Advertisement
