Advertisement
For more information on your access point, please refer to its Instruction Manual.
Simply press and hold the WPS button on your wireless router and then touch the
WPS:
camcorders screen. This is the easiest connection method if you are using a WPS-
Button*
compatible router.
Access the access points configuration screen using your Web browser. The camcorder
WPS: PIN
will give you a PIN code, which you will enter into the browser. You will need a WPS-
Code*
compatible router and a computer or other device connected to it.
Search for
Following the camcorders onscreen instructions, you select the desired access point from
Access Points
a list and then enter your password.
Manual
You manually enter the access points name, password and other network settings. This
Setup
method is recommended only for advanced users of Wi-Fi networks.
* WPS, which stands for Wi-Fi Protected Setup, is a standard that makes connecting to a wireless router
easier.
If your access point is WPS-compatible , connecting the camcorder to it can be very easy. If you cannot
successfully connect the camcorder using WPS, try using the [Search for Access Points] method.
[WPS: Button] method: Please proceed to step 14-a-1.
[WPS: PIN Code] method: Please proceed to step 14-b-1.
Search for Access Points: Please proceed to step 14-c-1.
Manual Setup: Please proceed to step 14-d-1.
REFERENCE
The camcorder can connect to a Wi-Fi network using a wireless router (access point) and even
remember the settings for the 4 most recently used access points.
IMPORTANT
General requirements for Wi-Fi connections.
Correctly configured router that complies with the 802.11b/g/n protocol and is Wi-Fi certified
•
(bears the logo shown below) and a home network.
Advertisement
