3. Remove the screws (×2
unit.
4. Disconnect the connector (S1).
5. Remove the Power button.
6. Remove the screw (×1
7.20. Remove the Front glass
1. Remove the Cabinet assy. (See section 7.18.)
2. Remove the S-Board. (See section 7.19.)
3. Remove the screws (×7
4. Remove the Glass holder bottom rear.
5. Remove the screws (×4
6. Remove the Glass holder side (L, R).
7. Remove the screws (×9
8. Remove the Glass holder top rear.
9. Remove the Front glass.
) and remove the S-Board
) and remove the S-Board.
).
).
).
10. Remove the Glass holder bottom front and the Glass
holder top front.
7.21. Remove the K-Board
1. Remove the Front glass. (see section 7.20)
2. Remove the claw (×1
3. Disconnect the connector (K1) and remove the K-Board
from LED Panel.
24
).