Sony DPF-WA700 Handbook page 62

To disconnect from a computer
Unplug the USB cable or turn the photo frame off after disconnecting the photo frame from
your computer as follows:
How to disconnect when using Windows 7 SP1
1 Click on (Safely Remove Hardware) on the Task Tray.
2 Click on Eject DPF-WA700 (or Eject DPF-W700).
3 Disconnect the USB cable.
How to disconnect when using Mac OS X
1 Select [File] on Finder.
2 Select [Eject "S-FRAME"].
3 Disconnect the USB cable.
• Use a Mini-B TYPE USB cable. If you want to use a commercially available USB cable, use
one with a Mini-B TYPE plug (be sure to connect the Mini-B TYPE USB connector to the
photo frame) shorter than 3 meters.
• If multiple USB devices are connected to a computer or if a hub is used, a problem may
occur.
• You cannot operate the photo frame from another USB device being used simultaneously.
• Do not disconnect the USB cable during data communication.
• Operation may not be guaranteed with some computers, even if they satisfy the
recommended system requirements.
• For USB connection, the photo frame has been demonstrated to be operable when connected
to a computer. When other devices are connected to the photo frame, these devices may not
recognize the internal memory of the photo frame.
• Do not connect a computer via the USB Mini-B connector of the photo frame simultaneously
when a USB flash drive device is connected to the USB A connector.
62
GB