Sony DPF-WA700 Handbook page 17

4 Confirm the displayed content and tap
[Complete].
The slideshow display appears.
If no image data are stored in the unit,
displayed.
CSearch Wi-Fi Networks
If the access point does not support WPS, the photo frame can be connected to the
Wi-Fi network by searching the connectable access points.
• Before setting, prepare the access point SSID (network name) and passphrase (WEP
key or WPA key).
1 Tap [Search Wi-Fi Networks] on the display.
2 Select an access point from the connectable access point list.
If no access point is found
Tap [Add Wi-Fi Networks], enter the SSID on the display then tap [Next].
Go to step 4 .
3 On the displayed screen, enter the
password then tap [Next].
By tapping the [Show password] button so that
the ✔ mark appears on it, you can confirm the
entered password.
Tap the blank area below the password so that
the screen keyboard appears.
* Input in a case-sensitive manner.
4 Tap [Auto (Recommended)] of the IP
address setting method.
Connection to the access point starts, and the
network setting will be made automatically.
If the IP address cannot be set automatically
• Select [Manual] and enter your IP address, Default Gateway, Subnet Mask ,
DNS Server (Primary), and DNS Server (Secondary) on the screen. Then tap
[Next].
is
17
GB
Continued r