Philips Sonicare DiamondClean 9000 Manual page 21

The handle is charging when the battery indication is blinking
white. When the handle is fully charged, the battery indication
illuminates white for 30 seconds and then turns off.
Note: Your handle comes pre-charged for first use. After first
use, charge for at least 24 hours.
Charging with the travel case*
*Note: The charging travel case may not be included depending
on the model purchased.
1 Take the USB cable from the bottom of the charging travel
case.
2 Connect the charging travel case to 5V DC input power either
from:
- The USB adapter provided
- a UL-listed or certified to ANSI/UL 60950-1 personal
computer's standard USB connector or,
- a UL-listed or certified to ANSI/UL 60950-1 LPS power
supply with USB output port or,
- a UL-listed or certified 1310 Class 2 power supply.
Important: The wall adapter must be a safe extra low
voltage source, compatible with the electrical ratings
marked on the bottom of the device.
3 The travel case charges your toothbrush until your
toothbrush is fully charged.
Battery Status (handle on plugged in charger)
When the handle is placed on the charger or in the travel case,
the battery indication will communicate the battery level.
Battery status Battery indication
21
English