Advertisement
To produce a daily Z report, do the following:
1. Turn the mode key to Z/PGM position
2. Press the TL/AT/NS
A daily Z resetting report will print. To will have *Z1* printed at the top of the report.
To produce a period X report, do the following:
1. Turn the mode key to FLASH/X position
2. Press the SHIFT
A period X report will print. It will have *X2* Printed at the top of the report.
To produce a period Z report, do the following:
1. Turn the mode key to Z/PGM position
Press the SHIFT
A period Z report will print. It will have *Z2* printed at the top of the report.
This list of Frequently Asked Questions is not intended to replace the XEA147 instruction manual. It
does not list all the functions and features of the XEA147. Please refer to the XEA147 instruction
manual for more guidance on functions and programming steps not covered in these "Frequently Asked
Questions".
XEA147BK and XEA147WH Frequently Asked Questions
key
TL/AT/NS
key
TL/AT/NS
key
Page 21 of 21
Advertisement
