Do you have a question about the 29692 and is the answer not in the manual?
Questions and answers
John Grogan
April 25, 2025
How do I reset the charger, it will not charge
1 comments:
Mr. Anderson
May 12, 2025
To reset the GreenWorks charger model 29692:
1. Remove the battery pack from the charger. 2. Wait for 1 minute. 3. Insert the battery pack into the charger again. 4. If the status LED flashes again, remove the battery pack and disconnect the charger from power. 5. Wait another 1 minute. 6. Reconnect the charger and insert the battery pack again.
If the status LED still blinks, the battery pack is defective and should be replaced.
Need help?
Do you have a question about the 29692 and is the answer not in the manual?
Questions and answers
How do I reset the charger, it will not charge
To reset the GreenWorks charger model 29692:
1. Remove the battery pack from the charger.
2. Wait for 1 minute.
3. Insert the battery pack into the charger again.
4. If the status LED flashes again, remove the battery pack and disconnect the charger from power.
5. Wait another 1 minute.
6. Reconnect the charger and insert the battery pack again.
If the status LED still blinks, the battery pack is defective and should be replaced.
This answer is automatically generated