Installation Instructions - HAMPTON BAY SKU 549-831 Instruction Manual

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Lock Nuts (#2)
2ea Outlet Box Screws (#10)

INSTALLATION INSTRUCTIONS:

1. Screw the two Mounting Screws (#11) onto the Cross Bar (#9). Mount the
Cross Bar (#9) to the Outlet Box (#7) using the two Outlet Box Screws (#10).
[Make sure the threads of the Mounting Screws (#11) are facing outside when
the Cross Bar (#9) is attached to the Outlet Box (#7).]
2. Wrap the ground wire from the fixture around the Ground Screw (#12) on the
Cross Bar (#9), and then connect the ground wire from the fixture to the
ground wire from the Outlet Box (#7). Connect the two white wires from the
fixture to the white wire (neutral wire) from the Outlet Box (#7). Connect the
two black wires from the fixture to the black wire (live wire) from the Outlet
Box (#7). Cover the three connections using the three Wire Connectors (#8).
Wrap the three wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#7). Note: If you
have electrical questions, consult your local electrical code for approved
grounding methods.
3. Place the fixture body on the wall by aligning the protruding Mounting Screws
(#11) all the way through the two holes on the Wall Plate (#1). Tighten the
fixture to the wall by screwing the two Lock Nuts (#2) onto the two protruding
Mounting Screws (#11).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
Page 6
3ea Wire Connectors (#8)
2ea Mounting Screws (#11)
1ea Cross Bar (#9)
1ea Ground Screw (#12)