Maintenance & Care - Bissell CleanView 3003 Series User Manual

Multi-cyclonic canister vacuum
Table of Contents

Advertisement

Maintenance & Care
Emptying the Dirt Tank
Empty the Dirt Tank as soon as the dirt reaches
the "FULL" lines on the sides of the tank.
1. Unplug the vacuum from the electrical outlet.
2. Press the Dirt Tank Release Button on the
Carry Handle and lift up to remove the Dirt
Tank.
3. Choose an emptying method. Method
#2 is recommended for allergy suffers.
Method #1 – Hold the Dirt Tank over a
rubbish bin and push the emptying
button to open the bottom. Close the
bottom after the dirt empties.
Method #2 – Place a plastic bag over the
bottom of the Dirt Tank. Push the emptying
button through the plastic to open the
bottom. After the dust settles, close the
bottom and remove the bag to discard.
4. Replace the Dirt Tank by placing it back into
the vacuum and pushing down on the Carry
Handle until it snaps back into place.
WARNING
To reduce the risk of electric shock, turn power OFF and
disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
2.
3.
4.
www.BISSELL.ca
7

Advertisement

Table of Contents
loading

Table of Contents