Motomaster 299-6913-2 Instruction Manual page 6

Model no. 299-6913-2/Contact us 1-888-942-6686
Allow the jack to lift the vehicle until the wheel(s) are slightly off the ground.
5
Set the Inflator/Jack switch to Off (middle) position.
After servicing the vehicle, set the jack Up/Down switch to the Down position to
6
lower the vehicle.
When jack is completely lowered, set the jack Up/Down switch and Inflator/Jack
7
switch to the Off(middle) position.
Disconnect the power cord from vehicle's cigarette lighter, wrap the cord into a circle
8
and store in its storage.
Inflator Function
Make sure both switches on the unit are set to the Off (middle) position. Press the
1
locking tab inward and swing open the lid of power cord storage on the side of the
unit and remove the power cord. Insert the power cord plug into the vehicle's 12 V
automotive outlet. Make sure the red LED indicator on the plug turns on.
Press the locking tab inward and swing open the lid of inflator hose storage on the
2
side of the unit and remove the hose.
For inflating vehicle tires, remove the cap from the tire threaded inlet air value stem
3
and securely screw the inflator hose connector into the valve stem.
For inflating other objects without the inlet air valve stem, attach desired adaptors to
4
the hose connector. Insert it inside the air inlet valve of the inflatable object.
Set the Inflator/Jack switch to the inflator position to start the inflator.
5
OFF OFF
5
TM/MC