Operation - Motomaster 299-6913-2 Instruction Manual

4
Model no. 299-6913-2/Contact us 1-888-942-6686

OPERATION

Jack Function
Make sure both switches on the unit are set to the Off (middle) position.
1
Press the locking tab inward and swing open the lid of power cord storage on the
side of the unit and remove the power cord.
Insert the power cord plug into the vehicle's 12V automotive outlet. Make sure the
red LED indicator on the plug turns on.
Place the jack on a flat, level and solid surface under the vehicle lifting point.
2
Align the jack saddle with the lifting point and rotate the saddle threaded rod to bring
3
the saddle closer to the lifting point on the vehicle's frame.
Set the Inflator/Jack switch to the Jack position and set the jack Up/Down switch to
4
the Up position to start the jack.
IMPORTANT
Before operating the jack, pull the vehicle over to a secure location.
Shut the engine off, put the vehicle transmission in the Park position and pull
the emergency brake all the way.
OFF
UP
DOWN
OFF
JACK