Maintenance And Servicing; Maintenance And Cleaning - Bosch Kiox 300 Original Operating Instructions

▪ <Auto trip reset>
The settings for automatic reset can be adjusted here.
▪ <Wheel circumf.>
The value of the wheel circumference can be adjusted
or reset to the standard setting here.
▪ <Components>
The components used with their version numbers are
displayed here.
– <System>
You can find the following menu items here.
▪ <Language>
You can select your preferred system language here.
▪ <Units>
You can choose between metric or imperial measure-
ments here.
▪ <Time>
You can set the time here.
▪ <Time format>
You can select one of the two time formats here.
▪ <Brightness>
You can set the display brightness here.
▪ <Settings reset>
You can reset all of the system settings to the default
values here.
– Under the <Information> menu item, you will find the
contact details (<Contact>) and certificates (<Certific-
ates>).
You can leave the settings menu by pressing the
Press the button to access the start page.

Maintenance and servicing

Maintenance and cleaning

Do not clean any of the components with pressurised water.
Keep the screen of your on-board computer clean. Dirt can
cause faulty brightness detection.
Clean your on-board computer using a soft cloth dampened
only with water. Do not use cleaning products of any kind.
Have your eBike system checked by an expert at least once a
year (including mechanical parts, up-to-dateness of system
software).
In addition, the bicycle dealer may base the service date on
the distance travelled and/or on a period of time. In this
case, the on-board computer displays a message telling you
when the service date is due each time it is switched on.
Please have your eBike serviced and repaired by an author-
ised bicycle dealer.
Have all repairs performed only by an authorised bike
u
dealer.
After-sales service and advice on using products
If you have any questions about the eBike system and its
components, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Bosch eBike Systems
Transport
If you transport your eBike attached to the outside of
u
your car, e.g. on a bike rack, remove the on-board
computer and the eBike battery to avoid damaging
them.
Disposal
Do not dispose of eBikes and their components with house-
hold waste.
Please return Bosch eBike components that are no longer
usable to an authorised bicycle dealer.
Subject to change without notice.
button.
The drive unit, on-board computer incl. operat-
ing unit, battery, speed sensor, accessories
and packaging should be disposed of in an en-
vironmentally correct manner.
In accordance with Directive 2012/19/EU
and Directive 2006/66/EC respectively, elec-
tronic devices that are no longer usable and de-
fective/drained batteries must be collected
separately and recycled in an environmentally
friendly manner.
0 275 007 3BK | (24.06.2021)
English – 3