1. Manuals
  2. Brands
  3. Infinity Manuals
  4. Paintball equipment
  5. LEGEND
  6. Operation and maintenance manual

Infinity LEGEND Operation And Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PLEASE READ ALL OPERATING INSTRUCTIONS BEFORE USING THE LEGEND PAINTBALL MARKER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LEGEND and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Infinity LEGEND

  • Page 1 PLEASE READ ALL OPERATING INSTRUCTIONS BEFORE USING THE LEGEND PAINTBALL MARKER...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS WARNINGS Important Safety Instructions and Guidelines........page 1 OPERATING INSTRUCTIONS Turning your LEGEND on/off..............page 2 Turning your LEGEND Eyes on/off.............page 2 Propellant Air/Nitrogen supply.............page 2 Bolt Removal..................page 2 Battery Replacement................page 2 Trigger Adjustment................page 3 Velocity Adjustment................page 3 High Pressure vs. Low Pressure............page 3 LED MENU AND PROGRAMING LED Colors and Meanings..............page 4...

  • Page 4: Important Safety Instructions And Guidelines

    • Never shoot at velocities above 300 feet per second. • Never look down the barrel or breech area of the LEGEND while the marker is under pressure. • Never put your finger or foreign objects into the breech or feed tube of the LEGEND.

  • Page 5: Operating Instructions

    Propellant Air/Nitrogen Supply The LEGEND is designed to operate on air/nitrogen gas. This needs to be supplied to the LEGEND at an ideal regulated pressure of 400 to 500 psi, using a suitable inline paintball regulator. Bolt Removal The bolt is manufactured from plastic, Delrin, so that it does not seize in the body due to the high operating speeds.

  • Page 6: Trigger Adjustment

    The LEGEND was designed to shoot very brittle paint by using low pressure and higher dwell. You can also make the LEGEND very air effi cient by raising the pressure and lowering the dwell. Each player should play with the settings to fi nd the best setting for them.

  • Page 7: Led Colors And Meanings

    LED Colors and Meanings The LED used by the LEGEND can light up in one of 3 colors. The LEGEND uses this to indicate to the user when certain events are occurring. This is a breakdown of what the LED states represent: Normal operation, anti-chop system is enabled, Eye Mode 2 (rate of fire capped at user preset).

  • Page 8: Dwell

    Solid Red Dwell Programming mode. Debounce programming mode. Solid Green Solid Orange Eye Mode programming mode. By pulling and releasing the trigger, the LED will change Ball In Place Delay (BIP Delay) color, advancing to the next Flickering Red programming mode. programming feature.

  • Page 9: Debounce

    Debounce Pull and release the trigger once for every 1ms of time you want the setting to be. For example, if you were programming the debounce to 6ms, you would pull and release the trigger 6 times. The default Debounce setting is 10ms. Eye Mode Pull and release the trigger the number of times necessary to set the Eye Mode to what you want to use.

  • Page 10: Programming Complete

    (lightly), DO NOT use grease. • The frequency of lubrication should be before every event or at least every 20,000 shots. • The LEGEND should never be immersed into water or damage will occur to the electronics. Ball Detent Replacement There are two anti-double ball detents that can be removed for cleaning or replacement.

  • Page 11: Legend Eye Service

    LEGEND Eye Service The LEGEND uses a dual optical eye (beam break) system to detect when an object is present in the breech and ready to fire. 1. The eye system is located under the same covers that holds the anti-double ball detent.

  • Page 12: Ram Removal And Lubrication

    Ram Removal The ram will need to be oiled on a regular base. Use the following steps to do so: 1. Remove the rear frame screw. 2. Remove the bolt by pulling up and back on the bolt pin. 3. Use a small Allen wrench and push the ram housing back through the slot under the bolt. 4.

  • Page 13: Appendix

    1. Is your paint Brittle? Or has it been exposed to cold weather? Follow storage instructions on the side of your box of paint 2. Is your Legend free of dirt or debris? Make sure your Legend is clean. Remove the bolt and loader and clean both the breech and feed neck 3.
  • Page 14 4. Once you have done step a-e, look for an O-ring located between the barrel threads and the breech of the gun. This O-ring should be very hard to locate use a flashlight if needed. If this o-ring is missing, replace it with a #017 O-ring.

  • Page 15: Terminology

    Terminology DWELL Dwell is the amount of time that the Solenoid valve is energized. This is measured in milliseconds (1/1000 of a second). The user can alter the Dwell only when in NORMAL mode. In COMPETITION mode, the Dwell menu item is not available. Possible values are from 4.0ms to 50.0ms.
  • Page 16 Our Technical Support Department is open Tuesday Through Saturday from 11am to 6pm , PST We can be reached at 310-914-3481 You can also E-mail your technical questions to info@infinitypaintballproducts.com Patent Pending Infinity Paintball Products, LLC 11919 W. Pico Blvd, Los Angeles, CA 90064...
  • Page 17 I n f i nity Pa in tba ll Pr od uc ts , L LC • • • 11 9 19 W. Pi co Bl vd, Los A nge les, C A 900 64 •• • 310- 914- 3481...

Table of Contents