Installation Instructions; General - Pelgrim GK210 Manual

7 Installation instructions

7.1 General

This appliance should only be connected up by a registered installer!
Caution!
The type of gas and the country for which the appliance has been designed are indicated
on the application identifi cation card.
This is a category 3 appliance.
Gas connection
• The gas connection must comply with national and local regulations.
• We recommend that the hob be connected by means of a fi xed pipe. Connection
using a specially designed safety hose is also permitted.
• Behind an oven use must be made of a pipe made entirely out of metal.
Warning!
• A safety hose may not be bent and must not come into contact with moving parts of
kitchen units.
• In all cases the connection tap for the appliance must be positioned such that it is
easily accessible.
• Before using the appliance for the fi rst time check the connections using water
and washing-up liquid to ensure that there are no gas leaks.
Electrical connection
230V - 50Hz - 1.1 VA (appliances GK215, GK225 and GK275)
• The electrical connection must comply with national and local regulations.
• Wall socket and plug must be accessible at all times.
• If you want to make a fi xed connection, ensure that a multi-pole switch with a
distance between contacts of 3 mm is installed in the supply cable.
• Do not use an adapter or an extension lead to connect the device to the electrical
mains. Safe use of the device cannot be guaranteed with these accessories.
66