Table of Contents
Advertisement
3.2.
Assembly
The D•TEX3F+ detector is mounted flat on a wall or a ceiling according to the dimensions given in
Figure 3.
▪
Mount the detector using suitable screws and pins.
▪
Make sure that dust deposits do not obstruct the sensor and that water does not enter the
detector.
▪
The D•TEX3F+ may be mounted horizontally or vertically.
▪
For vertical assembly, the box's cable glands can be oriented upwards or downwards but the
cover must always be in the position below.
www.dalemans.com
TOP
BOTTOM
Figure 4: vertical mounting of the D•TEX3F+
TOP
BOTTOM
|
12
Advertisement
Table of Contents
