Reassembling; Storing - Levoit Classic 300S User Manual

Reassembling

1. Flip the water tank over and place
the noise silencer back into the tank.
Figure 4.18
[ ]
Figure 4.18
2. Place the float back into the base
chamber:
a. Make sure the correct side of the
float is facing up. [
Figure 4.19
Figure 4.19
]
b. Insert the smaller prong into the
closed side of the float brackets.
Figure 4.20
[
Figure 4.20
c. Place the larger prong into the
open (U-shaped) side of the float
brackets.
3. Place the tank back on the base. Refill
the tank, if necessary.
4. Place the tank properly on the base and
place the tank cover on the water tank.

Storing

Follow the cleaning instructions (see page
16) and allow all parts to dry completely
before storing. Store in a cool, dry location.
]
21