Appendix; Advanced Picture Adjustments - Compaq 1024 Installation Manual

APPENDIX

ADVANCED PICTURE ADJUSTMENTS

This section is intended for the experienced user only. It includes a brief
description on adjusting the picture geometry, as well as the vertical
and horizontal position and size.
NOTE: Specific test patterns and service experience may be required
to perform these adjustments. If you have any problems adjusting the
service controls, just press Reset and start again.
Changing Front Panel Control Functions
A set of DIP switches recessed on the front panel of the 1024 Color
Monitor changes the functions of the front panel control buttons. Once
set, the settings are automatically saved and recalled each time you
change the monitor's mode
Both the DIP switches are set to Off at the factory, and you can use the
front panel controls control the following user functions:
Removing tile Rubber Cap to Change the DIP Switch Settings
• Horizontal-position (1)
• Horizontal-width (2)
• Vertical-height (3)
• Vertical-position (4)
A-1