1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Monitor
  5. 1024
  6. Installation manual

Compaq 1024 Installation Manual

Hide thumbs Also See for 1024:
Table of Contents

Advertisement

Quick Links

The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE
LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
FURNISHING,
THIS MATERIAL.
This guide contains information protected by copyright. No part of
this guide may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.
© 1992 Compaq Computer Corporation.
All rights reserved. Printed in Taiwan.
COMPAQ, DESKPRO, SYSTEMPRO, LTE, FASTART
Registered U. S. Patent and Trademark Office.
SLT, EZ Help, QVision, ProLinea and Contura are trademarks of
Compaq Computer Corporation.
The software described in this guide is furnished under a license
agreement or nondisclosure agreement. The software may be used or
copied only in accordance with the terms of the agreement.
Product names mentioned herein may be trademarks and/or
registered trademarks of their respective companies.
COMPAQ 1024 COLOR MONITOR
Compaq Computer Corporation
NOTICE
PERFORMANCE,
INSTALLATION GUIDE
First Edition (June 1992)
Second Edition (June 1992)
Part Number 141781-002
OR
USE
OF

Advertisement

Table of Contents
loading

Related Manuals for Compaq 1024

Summary of Contents for Compaq 1024

  • Page 1 THIS MATERIAL. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. © 1992 Compaq Computer Corporation. All rights reserved. Printed in Taiwan.
  • Page 2 Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Compaq Computer Corporation may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
  • Page 3 Text Mode (640 x 480) using MS-DOS Version 3.31 (or higher) and BASICA as published by Compaq Computer Corporation. HINWEIS Hiermit wird bescheinigt, daß der COMPAQ Series 460 und 461 in Übereinstimmung mit den Bestimmungen der BMPT-AmtsblVfg 243/1991 funk-entstört ist. Der vorschriftsmäßige Betrieb mancher Geräte (z.B.

  • Page 4: Table Of Contents

    CONTENTS COMPAQ 1024 COLOR MONITOR About the Monitor Installing the Monitor Using Controls and Indicators Care and Maintenance APPENDIX Advanced Picture Adjustments A–1 Preset Modes A–4 Specifications A–5...

  • Page 5: Compaq 1024 Color Monitor

    CAD/CAE. Its microprocessor intelligence allows easy adjustment of screen configurations with various display modes. Some of the features of the 1024 Color Monitor are as follows: • Supports VGA standards, Super VGA (800 x 600), 8514/A (1024 x 768 interlaced), and 1024 x 768 non-interlaced mode.
  • Page 6 COMPAQ 1024 Color Monitor To install the monitor, ensure that power to the monitor, computer system, and other attached devices is off and complete the following steps: 1. Connect the monitor AC power cord to a properly grounded AC outlet that is easily accessible and located as near the monitor as possible.

  • Page 7: Using Controls And Indicators

    COMPAQ 1024 Color Monitor USING CONTROLS AND INDICATORS This section describes the controls and indicators on the COMPAQ 1024 Color Monitor. Front Panel Controls The following illustration shows the front panel controls used to power on the monitor and adjust the contrast and brightness.
  • Page 8 COMPAQ 1024 Color Monitor Display Adjustment Controls The display adjustments on the 1024 Color Monitor are preset. Normally, you do not need to make any adjustments. If you need to make adjustments, press the panel marked PUSH on the front of the monitor.

  • Page 9: Care And Maintenance

    COMPAQ 1024 Color Monitor CARE AND MAINTENANCE • Use only a power source and connection appropriate for this monitor, as indicated on the marking label/back plate. • When you connect the monitor to an outlet or extension cord, make sure the total ampere rating of the products connected to the outlet...

  • Page 10: Appendix

    Reset and start again. Changing Front Panel Control Functions A set of DIP switches recessed on the front panel of the 1024 Color Monitor changes the functions of the front panel control buttons. Once set, the settings are automatically saved and recalled each time you...
  • Page 11 Appendix The following table shows the corresponding front panel control functions in each of the DIP switch settings: Adjustment Remarks Horizontal-position User controls. This is the default setting. Horizontal-width The monitor will Vertical-height always power on (↑) (↑) with the front panel Vertical-position controls performing these functions...
  • Page 12 Appendix The function of each control may be described as follows: 1. Vertical linearity If a cross-hatch pattern is displayed on the screen, equal spacing between the horizontal bars at the top and bottom of the screen indicates good linearity. However, if the horizontal bars appear to be crowded at the top of the bottom, the vertical linearity controls can be used to correct the problem.

  • Page 13: Preset Modes

    The Reset button returns control of all the 12 user and service parameters to the factory default settings. The Reset button only recalls the factory defaults of the mode currently in use. PRESET MODES The following table lists the preset modes available for the 1024 Color Monitor: Resolution 640 x 350 31.5 KHz.

  • Page 14: Specifications

    50 - 100 Hz Video Response 75 MHz Recommended Resolution • 640 x 480 • 800 x 600 • 1024 x 768 interlace • 1024 x 768 non-interlace Display Controls • Power On/Off • Brightness • Contrast • Reset Button •...
  • Page 15 Appendix Power Requirements • 85 Watts • 90 - 264 Volts universal power supply Dimension (W x H x L) 370.8 x 362 x 386 mm Signal Connector Pin 1 Red Video Pin 2 Green Video/Sync on Green Pin 3 Blue Video Pin 4 Ground (Sense S2)
  • Page 16 Appendix Power Cord Set Requirements The power cord set used with the AC adapter must meet the requirements of the country where you use the AC Adapter, whether it is 100-120 or 220-240 VAC. The following information explains the requirements for power cord set selection.
  • Page 17 .03 square inches (1.0 square millimeter). 3. The cord set must have a current capacity of at least amperes and a nominal voltage rating of 125 or 250 VAC. For more information about power cord set requirements, contact your Authorized COMPAQ Reseller.

Table of Contents