Advertisement
Connecting the Analog Output
Connect the left and right interconnect cables
from the BIZET's outputs to your preamplifier left
and right inputs. To maintain best sound quality,
it is strongly recommended that balanced
audio connections to be used.
Connecting a Turntable
Turntable Connection Types
For start listening, you only need to connect a
turntable to the BIZET as you would do to any
other phono preamplifier. Nevertheless, please
take note of the following: BIZET can be
connected to many different types of turntables.
To fully realize the sonic potential, use balanced
cable
connections
with
XLR
terminations
whenever
possible.
Balanced
XLR
cables
minimize interference from magnetic, hum, and
RF sources.
Because a phono cartridge is actually a true
balanced source, a balanced input is provided.
Connect the output cables from your turntable
to the left and right channel XLR input. Do not
short pin 1 (chassis/ground) to either pin 2 or 3 of
the XLR connector at any point in the cable,
turntable chassis, or tonearm. This will cause
hum in the system. Pins 2 and 3 must only be
connected directly to the cartridge pins. If your
turntable does not have XLR connections, use
the Cinch (RCA) input instead.
6
Advertisement
