GENERGY ROBUSTA Series Instructions For Use Manual page 50

4 Only clean the sponge pre-filter in a soap and water solution, allow it to dry
completely.
5 Dip the dry sponge pre-filter in oil, the same type used in the generator engine.
6 Drain by pressing the sponge pre-filter with your hand.
7 Now shake the paper filter against a hard surface, you can also clean it with an
air compressor (maximum 2 BAR).
8 Once the paper filter is clean, mount the sponge pre-filter on the paper filter and
assemble the complete and clean filter on the machine by following the same
steps used for disassembly.
CLEAN WITH WATER AND SOAP AND DRAIN
Once dry
DIP IN OIL AND DRAIN
20