Adjusting the Handle Height
You can raise or lower the handle in 1 of 3 positions that is more comfortable for you
1.
Remove both handle bolts and corresponding nuts.
2.
Move the handle to the desired height position.
3.
Secure the handle with the previously removed bolts and corresponding nuts.
During Operation
Starting the Machine
1.
Ensure that the battery pack is installed in the machine; refer to
2.
Insert the electric-start button into the electric starter switch (A of
3.
Squeeze the blade-control bar and hold it to the handle (B of
4.
Press the electric-start button and keep it pressed until the motor starts (C of
Figure 12
Installing the Battery Pack (page
Figure
Figure
Figure 13
16
(Figure
12).
13).
13).
Figure
13).
g331956
14).
g303152