Charging The Battery; Your Sim Card; Inserting The Sim Card; Inserting Memory Card - Sonim Bell XP5s User Manual

Hide thumbs Also See for Bell XP5s:
Table of Contents

Advertisement

3.
INSERT BATTERY
Insert the battery
and flush it into the
battery slot such that
the three metallic
contacts at the top of
the battery are aligned
with the metallic
contacts within the
battery compartment.
4.
CLOSE COVER
Close the battery
cover. Rotate the
battery cover screws
in a clockwise
direction. You can
use the screwdriver
provided to tighten
the screws. Ensure
not to over-tighten the
screws.

CHARGING THE BATTERY

The battery delivered with your mobile phone is not fully
charged. We recommend that you charge your mobile
phone for 5 hours before you use your mobile phone for
the first time.
Only the power supplies with outputs meeting
the SELV requirements can be used for charging.
The maximum allowable input voltage for the
phone is 9v.
There is a risk of explosion while charging if the
battery has been replaced by an incorrect type.
If the battery is completely out of charge, it can
take several minutes for the charging icon to
appear when the charger is connected.
BATTERY USAGE
1.
INSERT CHARGER
Insert the charger plug into a power outlet.
2.
CONNECT TO THE PHONE
The charging port is located in the lower side
of the phone, below the back cover. Insert the
charger connector to the charging port.
3.
CHARGING ANIMATION/ICON
• If the battery is being charged when the
phone is switched off, a battery charging
animation with the current battery level is
displayed.
• If the battery is being charged while the
phone is switched on, the battery icon
on the status bar shows the animation
indicating that the battery is being
charged.
• Once the battery is fully charged, the
charging animation is displayed and a
pop-up message Battery is full Please
unplug the charger is displayed.

YOUR SIM CARD

Purchase a SIM card from a mobile operator. The SIM
card associates your network services (for example,
phone number, data services, etc.) with your phone.

INSERTING THE SIM CARD

1.
UNSCREW COVER
Use the included
screwdriver to
unscrew the two
battery cover screws
on the back of the
phone.
7

Advertisement

Table of Contents
loading

Table of Contents