Applications; Music; Fm Radio - Sonim Bell XP5s User Manual

Hide thumbs Also See for Bell XP5s:
Table of Contents

Advertisement

APPLICATIONS

MUSIC

You can play music files and voice memos stored in your
phone using the music application.
From the Home screen, select Menu (
Applications (
) > Music (
• Select Artists to view the music files sorted based
on the artists.
• Select Albums to view the music files sorted based
on the albums.
• Select Songs to view the complete list of songs
stored in your phone.
• Select Playlists to access the default playlists in the
music folder.
• Select Recently added playlist to view the music
files that are recently added to the music folder.
• Select My recordings playlist to access all your
voice memo files.

FM RADIO

You can listen to the radio through FM radio. A wired
headset should be connected to enable FM radio.
1.
To listen to the radio, select Menu (
Applications (
) > FM Radio (
2.
A message Connect Headset is displayed.
Connect a wired headset with the side connector
to enable FM Radio. FM radio icon is displayed
on the Notification bar.
• Side Connector: As the Sonim XP5s device does
not support the jack, a side connector is used to
plug-in the jack and listen to FM radio over the
headset.
APPLICATIONS
) >
).
) >
) .
Side Connector
3.
Select Options > Radio On to turn on the radio.
4.
Select Options and the following options are
displayed:
• Auto Scan:
• On selecting Auto Scan for the first time, the
device starts scanning all available stations and a
pop-up message is displayed; Scanning for all
stations.
• Once the scanning is completed, a confirmation
message is displayed on All Channels screen;
Scan Complete: Number of channels scanned.
• If any channel is present in Preset list, select Auto
Scan and a pop-up message is displayed; Clear
the preset list? Select Yes to scan all available
channels.
• All Channels: All scanned channels are listed.
• Preset: Connect to a particular station and select
Options > Add to presets. The selected channel is
added to the preset list.
Select Preset > Options and the following options
are displayed:
• Rename: You can rename the channel/station.
• Remove from presets: Selected channel is
removed from the preset.
• Loud Speaker/Wired Headset: You can set the
radio on loud speaker. When you set the radio on
loudspeaker mode, it displays Wired Headset as an
option.
• Sleep: You can turn off the radio after a selected
time frame:
• 15 minutes
• 30 minutes
• 45 minutes
• 1 Hour
• Start Recording: You can record the audio which is
broadcasted on the radio to listen to the same later.
• Settings: The following options are displayed under
Settings:
• Regional Band: The regional band with frequency
range is displayed.
• Audio Output Mode: Select any of the following
options as a output mode: Stereo or Mono.
• Alternate Frequency: Check this option enable/
disable the auto selection of alternate frequency.
• Revert to Factory Defaults: This option deletes
all the settings including Presets. Select OK to
confirm.
• Radio off: Select this option to turn off the radio.
34

Advertisement

Table of Contents
loading

Table of Contents