Do you have a question about the Therapure TPP50 and is the answer not in the manual?
Questions and answers
Kristan Kuepker
January 22, 2025
I cleaned blades as always. Reinsert. Plugged back in. It now won't go on. Please advise. Thx
1 comments:
Mr. Anderson
February 10, 2025
The Envion Therapure TPP50 may not turn on after cleaning the blades and reinserting them due to the following reasons:
1. Not Plugged In Properly – Ensure the air purifier is securely plugged into a standard wall outlet (120V AC 60Hz). 2. Blades Not Inserted Correctly – Verify that the two collector blades are properly reinstalled; improper placement may prevent operation. 3. Power Issue – Check if the wall outlet is functioning by testing it with another device. 4. Unit Malfunction – If the purifier still does not turn on, there may be a defect requiring warranty service.
If the issue persists, contact customer service at 800-875-8577.
Page 2
Sweep debris into a plastic bag and dispose of properly. Contact your local waste management authority for instructions regarding recycling and the proper disposal of old lamp(s). To order a replacement lamp, call 1.800.875.8577 or go to www.envion.com. Mercury Notice...
Page 3
OPERATING THE TPP50 MINI Simply plug into a standard wall outlet (120v AC 60Hz). NOTE – Your Therapure 50 Mini UV air purifier should NEVER be used ® with extension cords. The Therapure 50 Mini UV air purifier should immediately illuminate, ®...
Page 4
Contact Info for Warranty Service: Therapure by BONECO North America Corp. ® P.O. Box 9159 | Van Nuys, CA | 91409-8291 1.800.875.8577 | www.envion.com 2020 BONECO North America Corp. All Rights Reserved. Patents Pending. www.envion.com 80062-02 TPP50...
Need help?
Do you have a question about the Therapure TPP50 and is the answer not in the manual?
Questions and answers
I cleaned blades as always. Reinsert. Plugged back in. It now won't go on. Please advise. Thx
The Envion Therapure TPP50 may not turn on after cleaning the blades and reinserting them due to the following reasons:
1. Not Plugged In Properly – Ensure the air purifier is securely plugged into a standard wall outlet (120V AC 60Hz).
2. Blades Not Inserted Correctly – Verify that the two collector blades are properly reinstalled; improper placement may prevent operation.
3. Power Issue – Check if the wall outlet is functioning by testing it with another device.
4. Unit Malfunction – If the purifier still does not turn on, there may be a defect requiring warranty service.
If the issue persists, contact customer service at 800-875-8577.
This answer is automatically generated