Resolution Products RE205 Instructions

Wireless
Security
Solutions
RE205 Temp Range, Honeywell-Compatible

Features

Freeze and/or Overheat warnings.
•
o Can be used as just Freeze, just Overheat or both simultaneously.
o Unique Loops for each function.
Integrated Magnetic Reed Switch for triple-duty door/freeze/overheat.
•
(magnet not included)
Cover tamper.
•
Strong, reliable RF signal.
•
8-10 year battery life on CR123A battery.
•
Low Battery indication.
•

Key Instructions

Battery "+" faces towards spring.
•
Enrolling:
•
Place Panel in Zone Programming mode.
Zone Type = for example, 24-Hr. Aux.
Input Type = Supervised RF Transmitter.
When asked for serial number, press Tamper switch.
Program the desired Loop number you want that zone to
monitor. Loop functions are:
Loop 1: Overheat.
•
Loop 2: Magnetic Reed. (magnet not included)
•
Loop 3: Freeze.
•
Loop 4: Tamper.
•
Test temp alarm functions by putting in a freezer, or blowing a hair
•
dryer on sensor.

Operation

Freeze (Loop 3)
•
Alarm: when room temperature drops below 45F.
Overheat (Loop 1)
•
Alarm: when room temperature rises above 100F.
Magnetic Reed (Loop 2)
•
Alarm: when a magnet is pulled away from sensor.
Tamper (Loop 4)
•
When cover is opened.
Supervisory: every hour.
•
RE205_Honeywell_Temp_Instructions Page 1 of 3
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
7-Mar-16

Specifications

Freeze Alarm Temp: 45F +/- 2F
Freeze Restore: when temp increases 4F from alarm
Overheat Alarm Temp: 100F +/- 2F
Overheat Restore: when temp decreases 4F from alarm
Mounting hardware: # 4 or #6 screws
Replacement Battery: CR123A 1550 mAH
Temperature Range: 0F to 120F
Housing dimensions: 3.3x1.4x1.1 inches
Specifications subject to change without notice.

Internal Picture

RE205_Honeywell_Temp_Instructions Page 2 of 3
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
Temp Element
Loop 1 = Overheat
Loop 3 = Freeze
Loop 4 = Tamper
Loop 2 = Magnetic Reed
Switch
7-Mar-16