Resolution Products RE206 Quick Start Manuals

Wireless
Security
Solutions
RE206 Tilt, Honeywell-Compatible
Features
• Alarm for anything that tilts.
• Two different alarm orientations from two different loops.
• Useful for hatches, roll-up doors and even moveable assets.
• Cover tamper.
• Strong, reliable RF signal.
• 10-15 year battery life on CR123A battery.
• Low Battery indication.
• 3.3x1.4x1.1 inches.
Key Instructions
• Battery "+" faces towards spring.
• Two different normal Mounting positions (non-alarm positions)
Straight up with battery at bottom, tamper switch at top.
(Loop 1)
Flat, so that alarm is when battery tips down. (Loop 2)
• Enrolling:
Place Panel in Zone Programming mode.
Input Type = Supervised RF Transmitter.
When asked for serial number, press Tamper switch.
Program the desired Loop number you want that zone to
monitor. Loop functions are:
•
Loop 1: Tilt Alarm when tipped to vertical
•
Loop 2: Tilt Alarm when tipped to flat
•
Loop 3: not used.
•
Loop 4: Tamper.
Operation
• Tilt
Alarm: When tilted more than 45 degrees from mounting position.
Tamper: when cover is opened.
Supervisory: every hour.
RE206_Honeywell-Compat_Tilt_Instructions.docPage 1 of 3
www.ResolutionProducts.com
28-Dec-12
Specifications
Tilt Sensing Angle: 40 degrees +/- 15 degrees upward cone
Tilt Operation Angles: 360 degrees
Tilt Element Technology: Gold-plated ball and contacts, non-mercury
Operational Life: 100,000 cycles
Mounting hardware: # 4 or #6 screws
Replacement Battery: CR123A 1550 mAH
Temperature Range: 0F to 120F
Housing dimensions: 3.3x1.4x1.1 inches
Specifications subject to change without notice.
Internal Picture
Shown in straight up, non-alarm mounting position (for Loop 2).
RE206_Honeywell-Compat_Tilt_Instructions.docPage 2 of 3
www.ResolutionProducts.com
Tamper Switch
Loop 4
Tilt Element
Loop 1 (Alarm = up)
Loop 2 (Alarm = flat)
Loop 1 Loop 2
Alarm Non-Alarm
? Cone Cone
?
Non-Alarm
Alarm Cone
Cone
Continues to operate even
when pointing into this
region
28-Dec-12