Uniflair PCOWeb Instruction Manual page 9

pCOWeb
C – PROXY
The following procedure tells the personal computer to not use the network device called the "proxy" for
communication: in fact, the PC is not connected to the network and if the "proxy" is not disabled communication
would not be possible.
1. Open the Windows "Control panel"
2. Double click "Internet options"; the windows shown in Figure 3.d above (left) will be displayed
3. Click "Connections". Another window (Figure 3.d – right) will be displayed.
4. Click "LAN Settings..."
5. Note down the settings.
6. Disable the proxy server.
7. Close the windows using the OK button.
Version 1.0 August 2007
Figura 3.d – Setting the proxy (steps 2,3,4)
Figura 3.e – Setting the proxy (vedi 5,6,7)
9