Uniflair PCOWeb Instruction Manual page 21

pCOWeb
ACCESSING TO THE CUSTOM HTML PAGES
The Internet Explorer now needs to be activated and the address which has been chosen must be written
in the space (in our example we have used 10.0.8.56 up until now).
A personalized page will appear on the screen depending on the type of unit which has been chosen (see
Figure 4.g)
Figure 4.g
The page features a photo on the left hand side of the unit which has been chosen.
A "STATUS" column indicates the operation mode (green led) or not (grey led not lit up) of the various
resources and the indication of the temperature and relative humidity present in the room. In the event of
an alarm state, a red led is lit up (if unit has a cold water valve, the opening value of the valve itself is also
shown).
An "ALARMS" column indicates the description of any alarms which may be present; it should be noted that
in order to reset them it is necessary press the button.
A third "PARAMETERS" column indicates the Set Points and the relative differentials of the various
parameters and the possibility of modifying them.
21
Version 1.0 August 2007