Uniflair PCOWeb Instruction Manual page 14

At this point, return to the initial configuration of the network by carrying out the same operation in reverse (see
page 8) to automatically obtain the IP address.
1. On the Windows PC click the mouse on the "Start" button left
2. Choose "Setting"
3. Click "Control Panel"
4. Double click "Network and dial-up connections"
5. Double click "Local area connection"
6. Click "Properties": the windows shown in Figure 4.b (left) is displayed
7. Double click "Internet Protocol (TCP/IP)": the window shown in Figure 4.b (right) is displayed.
14
Figura 4.b – Initial network settings
8. Click "Obtain an IP address automatically"
9. Click the button to close all the windows
pCOWeb
Version 1.0 August 2007