Damaged Rf Connector - Nokia 2366i Antenna Description And Troubleshooting

Nokia Customer Care

Damaged RF Connector

• The RF connector contains a switch. If this switch fails, there is a loss of
continuity between the input to the diplexer and the CDMA antenna, resulting in
a gain reduction of approximately -25 dB.
• Measure the DC continuity through the CDMA RF connector with no cable
connected. See
no DC continuity, replace CDMA RF connector X7300.
Antenna Contact Pad
CDMA RF Connector
Issue 2 - February 2007
Antenna Description and Troubleshooting
Figure 7 and Figure 8 for the location of this connector. If there is
Figure 7: CDMA Antenna Circuit
Figure 8: D-cover Removed
Company Confidential
2366i (RM-155)
CDMA RF Connector
Page 7