Nokia RH-37 Series Service Software And Tuning Instructions page 56

RH-37
Service Sofftware and Tuning Instructions
Note: TX Power Tuning must be done with a peak power meter, e.g. Anritsu model ML2408A with
Anritsu Peak Power Sensor MA2442A and a suitable attenuator.
The use of the built-in power meter of GSM testers is likely to cause larger errors than the use of a
dedicated power meter and might cause miss tuning so that the phone might be not compliant with
the GSM specifications.
Set power supply voltage Vcc = 3.6V !
Page 56
Nokia Corporation
Nokia Custome Care
Issue 1 07/04