Setting Up Your Tv ("Initial Setup") - Sony TRINITRON KV-SZ25M61 Service Manual

x Setting up your TV
("Initial Setup")
When you turn on your TV for the first time, the "Initial Setup" menu will appear.
You may change the menu language, preset the TV channels automatically, edit the
channels and adjust the picture position using the buttons on the remote control or
TV front panel.
1
Press V or v to select the desired menu
language, then press
The selected menu language appears.
2
Press V or v to select "Yes", then press
to preset the channels automatically.
The screen will indicate automatic
presetting in progress.
After all available channels have been tuned
and stored, the "Program Edit" menu
appears automatically on the screen.
To skip automatic channel presetting, select
"No", then press
If the message "No channel found. Please
connect cable/antenna" appears, check your
TV connections, then press
3
The "Program Edit" menu enables you to
edit the channels.
a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will appear
on the screen.
c) If you wish to edit the channels, press
to enter edit mode.
Press b until the mode that you wish to edit is
highlighted: Label, Skip,
Then press
1) To label, press V or v to select the
alphanumeric characters for the label.
Then press
6
Installation
.
.
.
(block symbol).
.
.
Select Confirm End
Select Confirm End
Program:
1
Searching...
End
Program Edit
PROG Label Skip
1 Off
2
Off
3
Off
4 Off
Edit:
Select Confirm Exit
Select Confirm Exit