Setting Up Your Tv ("Initial Setup") - Sony Trinitron WEGA KV-DA322 Operating Instructions Manual

x Setting up your TV ("Initial Setup")
When you turn on your TV for the first time, the "Initial Setup" menu will
appear. You may change the menu language, preset the TV channels
automatically, sort or edit the channels and adjust the picture position using
the buttons on the remote control or TV front panel.
1
Press V or v to select the desired menu
language, then press
The selected menu language appears.
2
Press V or v to select "Yes", then press
preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the "Program Sorting/Edit"
menu appears automatically on the screen.
To skip automatic channel presetting, select
"No", then press
If the message "No channel found. Please
connect cable/antenna" appears, check your
TV connections, then press
3
The "Program Sorting/Edit" menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will appear
on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new program
number position for your selected
channel, then press B.
6
Installation
.
.
.
Select
to
Select
Program:
TV System:
VHF Low
Program Sorting/Edit
PROG Label Skip
01 Off
02
Off
03
Off
04 Off
05 Off
Sorting: Edit:
Select
Program Sorting/Edit
PROG Label Skip
01
02
03
04
05
Sorting mode
Select
End
Confirm
Confirm End
01
Auto
End
Exit
Confirm
Off
Off
01 Off
Off
Off
Confirm Exit