RH-9
Service Tools
MJS-37 Module Jig
The MJS-37 Module Jig is used for testing of UI/system/RF-module*.
Product Code
MJS-37 Module Jig:
Note: The nominal supply voltage for MJS-37 is 8-12V
exceeds 12V
By default the MJS-37 supplies the phone with 4.1V
ages are needed (e.g. test or if FPS-8 is used as the power supply), it is possible
to modify MJS-37 to support this by removing R110 and mount S104. See the
MJS-37 schematic for more information.
Page 6
Figure 4: View of MJS-37
, the MJS-37 jig may be damaged.
DC
ãNokia Corporation
CCS Technical Documentation
0770282
. If the input-voltage
DC
. If other output volt-
DC
Issue 1 11/02