Download Table of Contents Print this page

Pda Display Change - Nokia 9210 Repair Hints

Hide thumbs Also See for 9210:

Advertisement

Table of Contents
Customer Care Europe & Africa
SCCE Training Group

PDA display change

When the changing of the PDA display is necessary be very carefull when closing the metal clips of the changed PDA display.
-
You may slip down and scratch the PCB or may lift some components, e.g. L051 (SCLK for display). See pictures below. A good
solution is the use of a small sidecutter for bending the clips down gently.
I024 Qwertyflex damaged
When opening the Qwertyflex connector on UI module be very careful because it could be damged.
-
Do not open
Not OK
Open the connector by lifting from the middle only. (See picture below)
OK
© 2002 Nokia Mobile Phones
the Qwertyflex connector by lifting it from the side. (See picture below)
!
CONFIDENTIAL
RAE-3
13.03.2002
!
Checked by:
Customer Care Training Group
15 (17)
Repairhints
Version 2.0 Approved
Approved by:
SCCE

Advertisement

Table of Contents
loading

Related Manuals for Nokia 9210

This manual is also suitable for:

Rae-3

Table of Contents