Customer Care Europe & Africa
SCCE Training Group
A-Cover snaps damaged
Be careful when disassembling the A-Cover because it is possible to damage the snaps of the A-Cover. In this case the
A-cover must always be changed. (See pictures below).
Flex cover assembling
When assembling the BL8 modul do not press the µBGAs while connecting because the components could be damaged. It is also
important to put the Flex-Cover between Chassis and BL8 modul otherwise a creak tone is to be heard when opening the lid.
© 2002 Nokia Mobile Phones
Customer Care Training Group
Version 2.0 Approved