2255 (RM-97)
Nokia Customer Care
Baseband Description and Troubleshooting
Figure 2: Measured power-on sequence and timing Flash Programming
Troubleshoot the power up sequence by performing the following checks:
• Check that Vbat gets to the mobile terminal and to UEMC
• Check that UEMRSTX is High
• Check that VFLASH1 is High
• Check Vcore and 19.2 MHz clock; if not check VR3
• Finally check PURX.
©2005 Nokia Corporation
ISSUE 1 10/2005
Company Confidential
Page 7