Turning On The Rx Path - Nokia 6275 Rf Description And Troubleshooting

Nokia Customer Care

Turning on the Rx Path

Use the following steps to turn on the Rx path using Phoenix.
1. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the mobile terminal into Local Mode.
2. Click the Execute button.
3. Depending on the band, use the applicable settings from the table below on the
RF Main Mode dialog box.
Issue 1 - September 2006
Figure 20: Phone Control dialog box
Table 4: RF Main Mode Dialog Box Settings
Band Mode
AMPS Rx = 881.52 MHz
Cell Rx = 881.52 MHz
PCS Rx = 1960 MHz
Company Confidential
6275/6275i (RM-154)
RF Description and Troubleshooting
Channel
384
384
600
Page 25