Page 1
WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 telephone: 775-689-5703 fax: 775-689-5976 www.wellsbloomfield.com OPERATION MANUAL BUILT-IN ELECTRIC HOTPLATES Models: H-336, H-636 and H-706 Model H-336 Includes INSTALLATION USE & CARE Model H-706 IMPORTANT: DO NOT DISCARD THIS MANUAL...
The prices charged by Wells Bloomfield for its products are SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over...
PARTS & SERVICE CUSTOMER SERVICE DATA Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this equipment will ensure that it gives you the very best performance and a long, economical service life.
FEATURES & OPERATING CONTROLS HEATING ELEMENT WELLSLOK HOTPLATE UNIT CONTROL UNIT HOTPLATE UNIT: Heating Element Element Support * Drip Pan* Wellslok CONTROL UNIT: Temperature Control Indicator Light Name Plate not used on model H-706 Provides heat for food preparation Coil-type elements rotate for access to drip pan Note: Solid (french plate) elements on model H-706 do not lift Holds coil-type element in proper position...
Hotplates with coil-type heating elements must be operated with drip pan and element support properly installed. Disconnect the hotplate from electrical power before performing any maintenance or servicing.
INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual. IMPORTANT: Water damage caused by failure to seat Wellsloks or...
GENERAL OPERATIONAL NOTES Carefully read the description of the hotplate operation on the specification sheet. DO NOT attempt to perform any maintenance or service unless the hotplate is disconnected from electrical power. DO turn the circuit breaker for the hotplate off before cleaning, servicing or performing any maintenance.
CLEANING INSTRUCTIONS CAUTION: ELECTRIC SHOCK HAZARD Disconnect hotplate from electric power before cleaning. CAUTION: BURN HAZARD Allow hotplate element and cabinet to cool completely before cleaning. CAUTION: ELECTRIC SHOCK HAZARD Do not submerge hotplate in water. IMPORTANT: DO NOT spill or pour water into interior of hotplate.
SYMPTOM POSSIBLE CAUSE Hotplate won’t heat Disconnect OFF or circuit breaker tripped One or more sections Temperature control not on won’t heat Damaged temperature control, element or other internal component Hotplate not hot enough Temperature control not set Operating 208/240V unit at 120V Damaged temperature control, element or other internal component TROUBLESHOOTING...
For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Bloomfield, LLC 2 Erik Circle P. O. Box 280 Verdi, NV 89439 Service Parts Dept. phone: (775) 689-5707 fax:...
Page 12
Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P.
Need help?
Do you have a question about the H-336 and is the answer not in the manual?
Questions and answers