Maintenance; Cleaning Instructions; Servicing And Safety - Raymarine E66008 Owner's Handbook Manual

All manuals and user guides at all-guides.com
Chapter 3: Maintenance
Chapter 3: Maintenance

Cleaning Instructions

Cleaning the Transducer
Sea growth can collect quickly on the bottom of the transducer, this
can reduce the performance in just a few weeks. To prevent the build-
up of sea growth, coat the transducer with a thin layer of paint. Use
only a water-based antifouling paint, or a water-based paint
specifically designed for transducers. Apply the paint with a brush.
If your transducer becomes fouled or stops working because of sand
or sea growth, use a stiff brush to clean it. You may sand the surface
with a fine-grit wet or dry sandpaper (#320 grade or finer), but this
will affect the performance of the unit when the boat is moving at
higher speeds.
The paddle wheel mechanism may become jammed by dirt, grit or
barnacles. Work this out of the mechanism, then clean the unit with
soap and water or alcohol.
Cleaning the Hull
Use caution when sanding or cleaning the outside of the hull near the
transducer.
CAUTION:
Harsh cleaning solvents such as acetone may damage the
transducer.

Servicing and Safety

• Raymarine equipment should be serviced only by authorized
• Some products generate high voltages, so never handle the
• When powered, all electrical equipment produces electromag-
Raymarine service technicians. They will ensure that service pro-
cedures and replacement parts used will not affect performance.
There are no user serviceable parts in any Raymarine product.
cables/connectors when power is being supplied to the equip-
ment.
netic fields. These can cause adjacent pieces of electrical equip-
ment to interact with one another, with a consequent adverse
effect on operation.
43